Baby Incubator Temperature Controller Infant Phototherapy Incubator, Infant Incubator Machine
|Power Source||Power Source|
|Noise Inside Hood Level||Less Than 51dB(a)|
|Transport Package||Wooden Case|
|Specification||1085mm x 640mm x 1120mm|
* Air mode and baby mode servo-controlled by micro-computer;* Set temperature, air temperature, baby temperature are displayed separately;* Natural air flow humidity;* Inclination of the bassinet is adjustable;* Multiple failure alarm indications;* RS-232 connector;* Low noise DC motor;* The oxygen inlet;* Optional configuration: >37ºC temperature set function, Baby scale, Vertical Height Adjustment cabinet, SpO2.
|Air mode control, tilting mechanism.||Air and Baby mode, tilting mechanism, with cabinet.||Air mode, tilting mechanism and phototherapy configurations.||Air and Baby mode, with cabinet, tilting mechanism and phototherapy configurations.|
Adopt tray base
Flexible and easy to adjust.
Equipped with preheating, manual control, skin-temp and other modes of control.
Split screen display
Cabinet temperature, skin temperature, humidity split-screen control, and display control range meet most clinical needs and special high temperature mode settings.
In the Skin-temp mode, there is a protection mechanism of "simulating children's skin temperature probe falling off", and the power can automatically be reduced to 30%-40% which can prevent newborns from overheating.
The overall aluminum trough box, and unique design, create a comfortable baby experience.
Sound and light prompt fault alarm
power failure, over temperature, temperature deviation, skin temperature sensor, manual prompt, Silence reminder, etc.
Radiation is made of Quartz heater material
Drawer type water tank
Easy to use
The baby bed surface tilt mechanism adopts a lockable gas spring device, one-handed operation, smooth and easy to use.
Audible & visible alarm of 3-level risk priorities, in line with YY0709-2009 national medical electrical equipment alarm system standard.
Hand control mode safety mechanism "A prompt will be issued after every 5 minutes. If the heating power is greater than 50%, the power will be automatically reduced to below 50% to prevent the newborn from overheating"
The maximum load of the IV pole: 10N
Aluminous framework with excellent heat preservation, adjustable basinet tilt up to 12°
Unique appearance design
The thickness of the baffle around the baby bed is ≥0.8cm, and the bedside baffle can be set down and removed for easy operation.
Unique trinity 48-item quality ex-factory inspection system, electrical components procurement system
Under the constant temperature state, the temperature fluctuation error is within plus or minus 0.5 degrees Celsius. The all-aluminum tank in the box helps to make the temperature uniform in the box.